Wood Panels and Humidity

Coping with wood movement

All wood workers need to be aware of wood movement when building furniture projects. Failure to consider this important factor can cause wood panels to crack or split.

My high school biology teacher compared the structure of a piece of wood with a bundle of straws. The straws represent the cells and capillaries of the wood. When a tree is growing water and food are transferred up through the cells and are carried throughout the tree.

Once a tree is fell the free water in the wood is lost rather quickly but the bound water trapped in the straw like cell is slower to dissipate. As the level of bound water is reduced these straw like cells get narrower in diameter but maintain their length. This is the fundamental reason that wood expands and contracts across its width but has almost no expansion length wise.

When working with wood it is very important to allow the wood to expand and contract with changes in humidity. As humidity rises the straw like cells expand in diameter with the opposite effect occurring as the relative humidity falls.

Ways to accommodate expansion

Lets use a cutting board for the first example. A solid wood cutting board with a bread board edge secured with a tongue and groove joint. One edge has the bread board edge secured on both ends with a dowel through the tongue The other bread board edge is secured with the same tongue and groove joint but this end only has a dowel in the center of the piece.

The end secured with two dowels will develop a crack in the main panel. Since the length of the edge piece doesn't change having it fixed across the width of the main panel from expanding.

Alternatively, the opposite end of the cutting board is only fixed in the center. The main panel is free to expand and contract towards the ends. The only visual difference would be that the ends of the edge piece are no longer flush with the edge of the main panel.

The second example uses a large glued up panel such as a table top. If the table top was fixed to the rails across the width of the panel the rise and fall of humidity would undoudtable cause the panel to split.

The best method to overcome this is use wooden clip to attach the two pieces. A 1/4" x 1/4" dado milled on the inside upper edge of the rails. This accepts a wooden clip that fits into the dado and is then secures to the underside of the table top. This will security hold the top hold the top onto the rails without restricting the expansion and contraction of the large panel. Without this the table top would slowly start to open up.

In general anytime you are fixing one piece of stock across a large glued up panel measures need to be taken to allow the panel to move. Remember that it will expand across its width but not its length. Using one of the two methods mentioned above you will be able to prevent your glued up panels from splitting.

About The Author

Dave Markel is the author of "The All Wood Working Journal". He has helped hundreds of individuals improve their wood working skills. Visit his site at http://all-wood-working-plans.com. Subscribe to the All Wood Working Journal at http://all-wood-working-plans.com/wood-working-tips.html.

---

Be Cool and Comfortable While Saving Money

The cost of energy is on the rise, so if... Read More

Art and Design

Maybe you've faced it before ? a new house with... Read More

Rodent Proofing Your Home

It's that time of year where rats and mice are... Read More

How I Got A Robot To Vacuum The House

Like most people I really hated to vacuum the house.... Read More

New Construction Windows Or Replacement Windows? Which Is Right For You?

Hello, my name is John Rocco.I grew up around the... Read More

Installing a Brick or Paver Walkway

The use of Bricks or Pavers to create a walkway... Read More

Make your Sauna a Focal Point

A sauna has been used throughout history in every part... Read More

Hammocks Create a Stress Free Zone

Stress is all around us, from the office to the... Read More

Wood Panels and Humidity

Coping with wood movementAll wood workers need to be aware... Read More

How to Get the Most Out of Your Home Theater ? Without Spending a Fortune

So you've scraped and saved, now you've finally gotten together... Read More

Door Hardware - the Focal Point of the Home

The door is the focal point of the home which... Read More

Contractor Referral

"As a contractor with 16 years of experience and speaking... Read More

Electric Radiant and Floor Coverings

If the decision of what type radiant heating system to... Read More

Buying Replacement Windows

While most buyers of double glazing are looking for replacement... Read More

Selecting the Right Air Compressor for Your Air Tool

An air compressor is used to power air tools such... Read More

Change The Style Of Your Interior With A Minimum Of Costs

The style of your interior depends for a great part... Read More

Basement Waterproofing Advice

Basements need to be waterproofed for many reasons. Cracks in... Read More

Guides To Interior Design

These days, finding advice or guides to interior design is... Read More

Planning Permission Tips UK - Off Road Car Parking - What Value - Do You Need to Apply for Planning

Isn't it a shame that for most folk, taking a... Read More

Laminate Flooring Advantages

DurabilityBecause it's designed with a tough and durable wear layer,... Read More

Planning Permission Tips UK - Rights of Light to Adjoining Neighbours Windows - What You Should Know

Rights of light - What a minefield this topic is... Read More

A Beautiful Carpet Sets The Mood Of Any Room

The first discovered carpet dates back to 1480 BC in... Read More

Bathroom Remodeling Ideas

Bathroom remodeling is often a popular home improvement project for... Read More

Grandfather Clocks Bring a Sense of Awe?Theyre So Tall

Standing tall and big are the stately grandfather clocks. They... Read More

Planning Permission Tips UK - Loft Conversions in UK Properties - Do They Add Value?

We get a great many requests to view the potential... Read More